Spróbuj wyszukać według słowa kluczowego, kodu zamówieniowego, kodu produktu lub numeru seryjnego np. "CM442" lub "Karta katalogowa"
Aby rozpocząć wyszukiwanie, należy wprowadzić minimum 2 znaki.
Flowfit CPA25 - Armatura przepływowa z osłoną chroniącą przed zachlapaniem

Armatura przepływowa
Flowfit CPA25

Uniwersalna armatura dla branży wodno-ściekowej i przemysłowych procesów pomocniczych.

CPA25
Please Wait (spinning wheel)
Ładowanie
Ceny tymczasowo niedostępne
Price on request
aktywacja ceny
cena: podaj informacje
from CHF ??.-
Filtruj pomiar / zastosowanie
Pomiar / Zastosowanie

Skonfiguruj, aby pobrać rysunki CAD dla tego produktu

  • Zasada pomiaru

    Potentiometric

  • Aplikacja

    Water, Wastewater, Utilities

  • Montaż

    Flow assembly

  • Charakterystyka

    Piping, bypass, branch line

  • Konstrukcja

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Materiał

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Temperatura procesu

    0 to 80°C
    (32 to 176°F)

  • Ciśnienie procesu

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Zasada pomiaru

    Amperometric oxygen measurement

  • Aplikacja

    Water, Wastewater, Utilities

  • Montaż

    Flow assembly

  • Charakterystyka

    Piping, bypass, branch line

  • Konstrukcja

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Materiał

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Temperatura procesu

    0 to 80°C
    (32 to 176°F)

  • Ciśnienie procesu

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Zasada pomiaru

    Conductive

  • Aplikacja

    Water, Wastewater, Utilities

  • Montaż

    Flow assembly

  • Charakterystyka

    Piping, bypass, branch line

  • Konstrukcja

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Materiał

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Temperatura procesu

    0 to 80°C
    (32 to 176°F)

  • Ciśnienie procesu

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Zasada pomiaru

    Amperometric oxygen measurement

  • Aplikacja

    Water, Wastewater, Utilities

  • Montaż

    Flow assembly

  • Charakterystyka

    Piping, bypass, branch line

  • Konstrukcja

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Materiał

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Temperatura procesu

    0 to 80°C
    (32 to 176°F)

  • Ciśnienie procesu

    max. 6 bar at 20°C
    (87 psi at 68°F)