Spróbuj wyszukać według słowa kluczowego, kodu zamówieniowego, kodu produktu lub numeru seryjnego np. "CM442" lub "Karta katalogowa"
Aby rozpocząć wyszukiwanie, należy wprowadzić minimum 2 znaki.
The Turbimax CUS31, czujnik do pomiaru mętności wody

Turbimax CUS31

CUS31
Please Wait (spinning wheel)
Ładowanie
Ceny tymczasowo niedostępne
Price on request
aktywacja ceny
cena: podaj informacje
from CHF ??.-
Filtruj pomiar / zastosowanie
Pomiar / Zastosowanie

Skonfiguruj, aby pobrać rysunki CAD dla tego produktu

  • Aplikacja

    Drinking water, industrial water

  • Montaż

    In immersion assembly, pipe installation or in a flow through holder with or without bubble trap.

  • Charakterystyka

    optical sensor for turbidity measurement according DIN ISO 7027.Precalibrated in a flow through holder with or without bubble trap.

  • Zakres pomiarowy

    0,000 - 9999FNU0,00 - 3000 ppm0,0 - 3,0 g/L0,0 - 200,0%

  • Zasada działania

    Optical sensor according 90° scattered light in the near infrared light (880nm) according DIN EN ISO 7027

  • Konstrukcja

    Infrared diodes with two receiver for low and high range values as well as a reference diode. Chamfered measuring head to optimize the self cleaning and optional with wipper cleaning to replace microbubbles from the optical windows.

  • Materiał

    Sensor shaft : PVC / PPS GF40Optical window : saphireCable : TPEO

  • Wymiar

    Diameter : 40mm
    1.56 inchLength : 191mm
    7.44 inch

  • Temperatura procesu

    max. 50°C
    122°F

  • Ciśnienie procesu

    max. 6bar
    87psi

  • czujnik temperatury

    Integrated NTC temperature sensor

  • Podłączenie

    Fixed cable connection

  • Stopień ochrony

    IP68

  • Dodatkowe dopuszczenia

    Calibration certification